Quick Repairs to Keep your Plastics


Rec'Repair Plastic Patch               -

A Revolutionary Repair Solution - Peel & Patch holes and cracks. See Video below


Plastic Patch

Patch 4" x 6" £10.50

Patch 3" x 10" £12.50

Plastic Patch Repair Kit

Small Emergency Kit £21.50

Large Emergency Kit £39.99

Rec'Repair Plastic Patch is a formable adhesive patch that mends holes and damage to bumpers, fenders, body panels, hoods,  kayaks, canoes, car top carriers, hiking poles, coolers, and more surfaces. It's as simple as heat, peel, and apply.

Patch Repair Kit's contents:-

• 1 4" × 6" repair patch

Small Kit

Large Kit

• 1 4" × 6" and 1 8" × 5" repair patches
• 1 water-activated heater bag
• 3 water-activated heater bags
• Gloves
• Gloves
• Foil bag packaging
• Foil bag packaging
• Instructions for using the heater and patch
• Instructions for using the heater and patch
• Alcohol wipes for surface cleaning
• Alcohol wipes for surface cleaning


The patch can be purchased in emergency repair kits containing all the tools you'd need for a serious repair in the middle of nowhere: a repair patch, a water-activated heating bag, gloves to handle the warm patch, alcohol wipes (for cleaning surfaces), and instructions or patchs only.

Please click to view




Patch Repair Kit's contents:-


Heated to about 194 °F, the material becomes flexible and moldable to any repair surface. As it cools, it becomes rigid again and retains the new shape. At operating temperatures, the material is rigid and strong.

Don't let damaged equipment put an end to your expedition. Rec'Repair® is a tough, formable patch for easily repairing holes and damage to kayaks, canoes, car top carriers, hiking poles, coolers, and more. It's as simple as heat, peel, and apply.



Bumper repairs or material replacement
Fender repairs or material replacement
Body panel repairs or material replacement
Hood repairs or material replacement
Clip replacements
Interior or exterior reinforcement
Aerodynamic sculpting around air intakes or damaged surfaces


The patch can also be used to repair trailer panels and flashings, motorcycle and ATV fairings, and any other vehicle damage requiring strong adhesion and structural support.

Unlike tape, the patch becomes rigid after it's shaped and then cooled, creating a durable, water-resistant, structural repair that won't crumble or peel off.

Originally developed for NASA and made with "shape memory" material, this temporary, all-weather, space-age patch can be warmed, molded, and adhered over the repair site, and allowed to cool, forming rigid structural support. Rec'Repair holds tightly to the damaged area with a high-performance adhesive.

Rec'Repair® kits include the same water-activated MRE heater bags used in the field by campers and soldiers. Adding water to the heater bag triggers a reaction that produces steam and enough heat to make the patch flexible.HOW THE KITS WORK


Clean the damaged area with the alcohol swabs provided. The area should be dry and free of dirt and debris or the patch may not work. Remove all contents from foil bag. Put on protective gloves. Tear off the top of the heater and pour water into the heater bag until it reaches the fill lines. This activates the heater.


Heat the patch with the water-activated heating bag, included in the kit, until the patch becomes flexible. The patch material can also be heated by being wrapped in foil in a frying pan on a camp stove, with a heat gun, with a hair straightener (flat iron) or with another heating device from an RV.


Peel off the adhesive backing while the patch is flexible and warm.


Form the patch material over and around the damaged area. Press to ensure consistent adhesion. Shape the patch until it cools (only seconds) and becomes rigid.


Within minutes, your repair is complete.

Holds, strengthens and repairs a variety of materials and surfaces including boats, oars, paddles, canoes, kayaks, coolers, hiking poles, backpack frames, and ATV fairings.



For best results, clean the damaged area first. For best adhesion, damaged area should be dry and free of dirt and debris.

  1. Heat the patch to approximately 194 °F (90 °C) using an appropriate
    heating method. Heating methods can be MRE heater (included with kits),
    oven (wrap in foil to protect paper backing), or heat gun.  Warning: DO NOT
    HEAT ABOVE 270 °F (132 °C).
    Be sure your heating method complies with safety
    standards according to the conditions under which you will be applying the patch-
    for example, outdoors, in rainy weather, near flammable materials, etc.

  2. Once the temperature is near or above 194 °F (90 °C), the material will soften and
    become very flexible. While heated, it can be easily cut to shape with scissors, if
    desired. While wearing gloves that protect against the heat, remove and discard
    the paper backing from the material. Avoid touching the adhesive once the paper
    backing is removed.

  3. With the adhesive side facing the repair surface, form the flexible Rec'Repair
    patch over the damaged area, applying pressure to shape it and press it into the
    contours of the repair surface. Continue pressing and shaping until it cools and
    becomes rigid again. Cooling time depends on the temperature of the damaged
    surface and on ambient air temperature, but normally the patch cools and becomes
    rigid again within seconds.

  4. Rec'Repair is a strong  repair which can be removed later by prying it off
    with a putty knife or other slender object. It's best to remove it while it's cool

How can I heat the patch?

We recommend a standard heat gun. Other heating devices that can be used include a paint stripping gun, a conventional or toaster oven (wrap the patch in foil to protect the paper lining), a microwave (wrap the patch in a paper towel and do not overheat), or a sealed boiling bag. Hair dryers typically do not generate enough heat to activate the patch.

Plastic Repair


 Plastex    Repair your Plastics

Click here to view a detailed instruction video

Plastex easily glues, fills gaps, repairs stripped threads and can remake tabs or small parts in just minutes

                        Repair or reproduce almost any plastic part quickly and easily.
  • Only Plastex has a reusable molding bar that gives you the ability to repair or reproduce almost any plastic part quickly and easily.
  • A revolutionary new product that makes even difficult repairs quick and easy.
  • Plastex can be sanded and painted.
  • Plastex does what other glues and adhesives can't.
  • Plastex is available in Black, White, Clear, Yellow, Orange, Red, Green, Blue and Brown
              Instruction video included in all pack




Plastex Small Kit

  • 1 ea. 5 g powder
  • 1 ea. 10 ml liquid
  • 1 ea. molding bar
  • 1 ea. applicator bottle
  • 1 ea. applicator needle
  • 1 ea. pipet
  • Available in black, white and clear
 1801W White £12.50
 1802BL Black £12.50
 1803C Clear £12.50

In stock, Allow 1-3 working days for delivery




   Plastex Mini Master Kit

Same as small kit

includes 5g ea, powder - white black  and clear

Product code 1805

 1805 Kit £14.99
In stock, Allow 1-3 working days for delivery



   Plastex Standard Kit

  • 1 ea. 30g powder
  • 1 ea. 50 ml liquid
  • 1 ea. molding bar
  • 1 ea. applicator bottle
  • 2 ea. applicator needles
  • 1 ea. powder dish
  • 1 ea. pipet
  • Available in black, white and clear
 2001W White £19.50
 2002BL Black £19.50
 2003C Clear £19.50
In stock, Allow 1-3 working days for delivery


         Plastex Master Tech Kit

  • 30g each - black, white, clear powder
  • 50ml liquid
  • 4 applicator needles
  • 3 applicator bottles
  • 3 powder cups
  • 2 molding bars
  • Reinforcement cloth
  • Reusable case
  • 1 instructional CD/DVD

 2006 Kit £44.99

           In stock, Allow 1-3 working days for delivery  
           Powder Refill - 30 Gram

2101 = White
2102 = Black
2103 = Clear
2104Y = Yellow,
2104G = Green,
2104B = Blue,
2104R = Red,
2104O = Orange      

£10.50 each
           In stock, Allow 1-3 working days for delivery  

Liquid Refills

Liquid Refill - 50 ML   
2110 £9.99

In stock, Allow 1-3 working days for delivery


         Fiber Reinforcement Cloth

Used to cover  areas that are weak or prone to crack

2115 £2.99

In stock, Allow 1-3 working days for delivery


         Plastex Shop Kit

  • 250g powder
  • 250 ml liquid
  • 1 applicator bottle
  • 4 applicator needles
  • 1 Large pipet
  • 1 powder dish
  • 3 molding bars


 1903C Clear £64.00
In stock, Allow 1-3 working days for delivery

         Plastex Master Shop Kit

  • 250g of each powder, white, black, clear
  • 550 ml liquid
  • 4 applicator needles
  • 2 applicator bottles
  • 3 molding bars
  • 3 powder dishes
  • 1 Reinforcement cloth
  • 1 large pipet
  • 1 instructional CD/DVD

# 1905 Kit £130.00
In stock, Allow 1-3 working days for delivery


         Powder Refill - 250 Gram

1921 = White
 1922= Black
1923 = Clear

£30.00 each


Liquid Refills

Liquid Refill - 250 ML 
  1910 £22.99




12    3 Pack Reusable Molding Bars

 Product code 2115


Filling Liquid Applicator & Powder Dish
Using the Needle Applicator

Squeeze bulb on pipet, put tip into liquid and release pipet bulb to draw liquid.
Move pipet to uncapped applicator bottle and squeeze pipet bulb to transfer the liquid

Remove tip of powder bottle, gently squeeze powder from bottle into dish

Applying Plastex Using the Applicator Needle:
- Place the needle onto the tip of the liquid applicator bottle.
- Position above powder dish, gently squeeze liquid bottle and place one or two   drops    into powder
- Quickly pickup sphere with the tip of the needle and position over repair area
- Gently squeeze liquid bottle to flow the materials onto repair area, repeat as needed  to complete repair
- Tip:  Can't pickup mixture ball - Fill powder dish. ·
- Tip:  Too much liquid comes out - Fill liquid bottle to avoid this


Using Plastex to Repair Cracks and Fill Gaps
Remove dirt and oil from repair area.
File or grind a V groove along cracked area
Apply Plastex mixture onto repair area as needed
Allow Plastex to cure and finish as needed
Use cellophane tape to keep mixture from seeping through crack.
Tip:  If mix sets too soon, add more liquid

Repair Cracks and Fill Gaps

Repairs Using Plastex with Fiber Reinforcement Cloth

Place reinforcement cloth onto cellophane sheet.
Sprinkle Plastex powder onto cloth as needed.
Apply Plastex liquid as needed to saturate powder.
Place onto repair area and adapt to repair.
Allow Plastex to cure and remove cellophane.
  Use reinforcement cloth on areas that are weak or prone to crack.

Repair weak or areas prone to Cracks








13 Plast-aid Acrylic and PVC  Multi Purpose Repair Kit


Size 1.5oz £14.99   

   In stock, Allow 1-3 working days for delivery

Size 6oz £24.99     

   In stock, Allow 1-3 working days for delivery

Plast-aid®, the exciting new multi-purpose repair plastic used for thousands of repair solutions! Unlike anything on the market today, Plast-aid® forms a hard, durable, waterproof plastic in only
Plast-aid® is a two part compound consisting of a liquid and powder. When combined, Plast-aid®'s unique curing process begins. As it thickens, Plast-aid® transforms from a castable liquid, to a glue, to a putty, to a clay, and finally to a hard, durable, waterproof plastic. This progression makes Plast-aid® an incredibly versatile tool allowing it to be cast into molds, used to repair breaks and fill gaps, formed into shapes for custom parts, and much, much more!
Colour Plast-aid® with artist acrylic or wood stain.
After Plast-aid® cures, drill, cut, file & polish your custom parts

For Car
From fixing cracked panels & fenders, to stripped knobs, to broken light lenses

Pool and Spa

Repair pools & spas, hot tub, skimmers, holes, cracks, leaky PVC, ABS, Acrylic, etc.

Plast-aid® repairs are fast, waterproof & permanent

Unsurpassed for PVC plumbing repair! Don't cut out damaged PVC, simply & permanently patch it with Plast-aid® in only 15 minutes!
Make custom fittings & threaded adaptors

Fix everything from dropped cell phones, remote controls & hair dryers to stripped out hinges, broken toys, computer housings & refrigerator shelves
Repair broken items and create custom parts with one product!
Use Silly® Putty to make molds of ornate knobs, Cast the molds with colour Plast-aid®. Fill cracks.
Use on model planes, trains & boats

Polyethylene and Polypropylene Adhesive Glue

3M Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693H

 Colour -Clear    Size -5 0z Tube


This adhesive is unique in its ability to bond hard-to-hold materials like polypropylene, polyethylene, and high-impact polystyrene.

3M Scotch-Weld High Performance Industrial Plastic Adhesive 4693H is a clear, elastomeric adhesive with exceptional adhesion to metal and plastic. It has immediate bond strength as well as long tack range and contact bond properties. Exhibits outstanding bond strength to metals and many plastics. Good resistance to water and aging.



• 3M™ Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693: low viscosity grade for spray or brush application.

• 3M™ Scotch-Weld™ High Performance Industrial Plastic Adhesive 4693H: high viscosity grade in collapsible tubes for flow applications.

• Clear, elastomeric adhesives with high immediate bond strength, long tack range and contact bond properties.

• Exhibit outstanding bond strength to many metals and many plastics such as ABS, glass filled polyester, polypropylene, linear polyethylene and hi-impact styrene.

• Dries to a tough, flexible and transparent film with good resistance to water and aging.

Note: Not recommended for use on plasticized vinyl. Use on plasticized vinyl may result in poor adhesion or bonds that deteriorate over time.


Non-Porous Surface: Brush, spray or flow an even coat of adhesive to both surfaces. To achieve a satisfactory bond, adhesive must be force dried @ 180°F (82°C). Bond with firm pressure while warm.

Drying Time: Drying time depends on temperature, humidity, air movement and porosity of the materials bonded. When brushing, wait a minimum of 10 minutes.

Bonds can be made up to 60 minutes. Sprayed bonds may be made almostimmediately and up to 60 minutes.

Heat Reactivation: Adhesive may be heat reactivated by raising the gluelinetemperature to 180°F (82°C).

Cleanup: Excess adhesive may be removed with a solvent such as 3M™





Damaged and false holes in PVC profiles doors, windows ansd other frames can be fixed very quickly and securely with this repair mass (liquid resin and powder).
COSMOFEN RM is available in white. COSMOFEN RM hardly shrinks whilst hardening. Even when the damage is vertical or large, the high viscosity of COSMOFEN RM (thixotrope) prevents the mass from running. The repair mass ensures an excellent adhesion.

COSMOFEN RM is supplied in a set with ready to use portions including mixing spatulas


Colour - White      size 19g






COSMOFEN PLUS is suitable for quick, constructional bonding of hard PVC materials like window, doors, water bars, additional profiles and strips, blind components, gutters or pipes.Special adhesives are available for special applications such as combining material like hard PVC and Renolit surfaces or for bonding coextruded profiles (trocal, gealan).COSMOFEN PLUS HV is also available in white.
COSMOFEN PLUS HV transparent and white are mainly used for assembly bonding. Size 200g tube
Price - £7.99              Available in clear transparent and white

In stock, Allow 1-3 working days for delivery



PVC Cosmofen 515 Cyanoacrylate Glue



A quick drying 'superglue' and activator combination for bonding
trims, end caps etc for PVC. Does not yellow on white profiles and is ideal
for foiled woodgrains as it will not stain. Also for bonding of bigger gaps.


Colour - White      size 19g









3M Scotch-Weld Instant Adhesive CA4

One drop Instant Adhesive Thin  Clear Glue

One-Part, thin, High- Structural Strength, Fast Setting, Multi-Purpose Cyanoacrylate Adhesive Cures at Room Temperature and dries clear.

It is economical to use because generally only drops of adhesive are needed to develop strong bonds to 

Metals, Plastics Steel, Aluminum, ABS, PVC & Rubber.

Time to Handling Strength 5-40 (seconds)
Viscosity (cps) 150, Temp range 40 - 200 F, 1 oz Bottle.






1 Mend It Soft Fishing Plastic Bait  (and for other Soft Plastics)

 Mend It Soft Plastic 1/3 oz  6.99

Mend It Soft Plastic 1 oz   9.99


Mend-It glue repairs all soft baits. Worms, senkos, trailers, lizards, swimbaits. soft plastic & more!
A non sticky, no mess, repair solution for all soft plastic baits and for other soft plastic. Dries soft and natural.

Just add a few drops to the tear or separation - hold together for 5 seconds and it's fixed.
It will then cure in a few minutes in warm weather and the repaired soft plastic lure is ready to use.
First of all, Mend-It! is not a glue! Mend-It! simply re-catalyzes the plastic. Mend-It! does not leave hard spots in your bait like super-glues do, Mend-It! keeps your baits soft and natural as if they were new again. Mend-It! doesn't stick to your fingers, only to your soft plastic baits. Mend-It! leaves no residue at all and most repairs are invisible!

*Non sticky no mess
*Dries soft and natural
*Quick repairs
*Instruction included in package
1/3 and 1  oz bottle

Glass Patch


GlassPatch is a strong-as-steel, clear adhesive film that holds broken glass together for safer and more secure classrooms. GlassPatch comes in a roll and needs no tools or special training.

Use GlassPatch for emergency repair of cracked or broken windows, or to reinforce good windows. GlassPatch comes in a roll and is easy to use.

What makes GlassPatch great?

  • Saves money
  • Keeps classrooms safe
  • Applied in seconds
  • Crystal clear, strong-as-steel
  • Requires no special skills, tools
  • Keeps windows fully functional
  • Keeps weather and insects out



Glass Patch 18" x 90"  £19.99


A roll of GlassPatch is like having a few spare windows in your toolbox, always ready to make that window fully functional again. Using GlassPatch is easy and requires no special tools or training. Simply cut GlassPatch to desired size, peel off backing and apply to window. What could be easier?